Bostwick-Braun Industrial

Filter

Search Within Brand

: In Stock Only
: Adjustable Wrenches (3)
Ball Pein Hammers (1)
Bit Screwdrivers (13)
Bluetooth & Wireless Speakers (1)
Bolt Cutters (1)
Box End Wrenches (1)
Box, I-Beam & Torpedo Levels (4)
Bucket Bags & Tool Organizers (2)
Cable & Wire Crimpers (1)
Cable & Wire Cutters (10)
: 1-3/8 in (1)
: +/- 0.1 deg from 0 deg to 1 deg, 89 deg to 91 deg, 179 deg to 180 deg; +/- 0.2 deg at All Other Angles (1)
+/-0.029 deg (3)
+/-3/32 in per 33 ft(+/-2 mm per 10 m) Vertical and Horizontal Beams, +/-1/8 in per 33 ft (+/-3 mm per 10 m) Plumb Up Spot, +/-5/32 in per 33 ft (+/-4 mm per 10 m) Plumb Down Spot (1)
0.043 deg Spot: +/-0.02 in (+/-0.5 mm) At 39.4 in (1 M) (1)
: Center, at17.7 in (45 Cm), High Min 10.5 ft/Sec (3.2 M/Sec), Low Min 8.2 ft/Sec (2.5 M/Sec) (1)
: 10 A (4)
: Aluminum and Copper (1)
Stainless Steel, Mild Steel, Iron, Copper and Brass (2)
: 6 in (1)
: Long (1)
: 6/10 hr (1)
: 2 x AAA (3)
3 x Aaa (1)
9 V (1)
Alkaline 1.5 V AAA (1)
: 10 hr (1)
5 hr High, 9 hr Low (1)
: 2 x AAA (4)
2AAA (1)
AAA Alkaline (1)
Lithium-Ion (3)
: 2 in (2)
: 10, 22, 30, 45 and 60 deg (1)
: 5 in (1)
6 in (1)
: Ball Bearing (1)
Interchangeable Steel Shaft (1)
Quick-Change (3)
: Hex Nutdriver/Phillips®/Slotted/Torx® (1)
Phillips® (2)
Phillips®, Slotted (1)
Phillips®, Slotted, Square, Combo, Torx (2)
Phillips®/Robertson/Square Recess/Slotted (1)
Phillips®/Slotted (1)
Phillips®/Slotted/SchraderВ® Valve Core Removal (1)
: 25 ft (1)
25-30 in (1)
3-3/8 in (1)
3.4 in (1)
5.2 in (1)
: 420HC Stainless Steel (1)
440A Stainless Steel (1)
Hardened Carbon Steel (1)
Steel (1)
Steel Wheel With Black Oxide (1)
: Drop (1)
: Hooded (1)
Tanto (1)
: 1.45 in (1)
5/16 in (1)
: 0.125 in (1)
: Aluminum (3)
Carbide (1)
Cast Alloy Chassis with Heavy-Duty Ecoat Finish (1)
Cast Zinc Alloy (1)
Forged Steel (1)
Metal, Plastic (1)
Plastic (1)
Steel (3)
: LED (3)
: 0.18 to 0.6 in (1)
0.3 to 0.8 in (1)
0.50 to 1 in (1)
0.7 to 1.25 in (1)
2/0 AWG - 250 MCM (1)
: ACSR, AAC, Copper (3)
MTW/THHN/THWN-2 (1)
Stranded (1)
: 10 to 22 AWG (1)
18-10 AWG Solid (1)
18-10 AWG Solid, 20-12 AWG Stranded (1)
18-8 AWG Solid, 20-10 AWG Stranded (1)
20 to 30 AWG Solid, 22 to 32 AWG Stranded (1)
20-10 AWG, 22-12 AWG (1)
22 to 10 AWG (3)
26-10 AWG Solid, 28-12 AWG Stranded (1)
26-16 AWG Stranded (1)
350 kcmil Aluminum/Copper (1)
: 1000 Micron (1)
200 uF (1)
4000 uF (1)
6000 uF (1)
: 1512 cu-in (1)
: Plastic/Metal (2)
: 4-10 hr (1)
4-8 hr (1)
: Straight (1)
Straight Grain (1)
: 4-1/4 in (1)
4.6 in (1)
: Adjustable (1)
: Beige (1)
Black (18)
Black Handle (1)
Black with Orange/Gray (1)
Black with Orange/Gray Trim (3)
Black/Green (1)
Black/Orange (5)
Black/Red Handle (1)
Black/Yellow (4)
Blue (2)
: Wireless (1)
: 5 VDC, 1.3 A Micro-USB (1)
USB Charging (1)
: 2000 (1)
4000 (1)
6000 (2)
: Beveled Semi-Flush (1)
Diagonal (3)
Diagonal/High Leverage (1)
Flush (1)
Induction Hardened (2)
Non-Slip (1)
Side (1)
Standard (5)
: Yes (1)
: 23 to 19 AWG (1)
5/8 in Ground Rod, 1/2 in Rebar, 7/16 in Grade 8 Bolts and 1/2 in Grade 5 Bolts (1)
: Carbide Tipped (1)
Hardened Carbon Steel (1)
M2 Steel (1)
: 1-1/8 in (1)
12 in (3)
3/4 in (1)
7/8 in (1)
: 0.589 in Dia x 0.84 in W x 5.97 in L x 1.16 in H (1)
0.7 in W x 12.5 in L x 7 in H (1)
1 in (1)
1 in W x 3.25 in L x 11 in H (1)
1 in W x 3.5 in L x 5.7 in H (1)
1 in W x 5.25 in L x 7 in H (1)
1 in in W x 24 in L x 2.5 in H (1)
1.09 in W x 5.82 in L x 0.86 in H (1)
1.1 in W x 2.5 in L x 4.1 in H (1)
1.21 in W x 6.45 in L x 1.32 in H (1)
: Yes (3)
: Backlit (1)
Backlit LCD (2)
Digital Lcd (1)
High Visibility Reverse Contrast (2)
LCD (6)
TFT LCD (1)
: 20 m (1)
9.8 ft (1)
: Imperial (1)
: 1/2 in (1)
: 0.228 x 0.221 in (1)
: #1 x #2 (1)
: #2 (1)
1/2 in (1)
1/4 in (3)
3/16 in (1)
7/16 in Hex, 1/2 in Square (1)
: Ball End (3)
Hex (5)
Hex/Square (1)
Keystone (1)
Phillips® (1)
Slim-Tip (1)
Slotted (1)
Torx® (1)
: No (4)
: 125 V, 250 V, 500 V and 1000 VDC, 1000 VAC/VDC (1)
: 1000 VAC/VDC, 600 A (1)
600 VAC, 1000 VDC, 200 A (1)
600 VAC/VDC, 400 A AC (1)
: IP54 (1)
: IP40 (1)
IP42 (1)
IP53 (1)
IP54 (3)
: 4 in (1)
5 in (1)
5.125 in (1)
: Serrated Round (3)
: Crowned (1)
: Black (1)
Black Oxide (2)
Black/Yellow (1)
Induction Hardened (1)
Nickel Plated (1)
Plastic Dipped (4)
Plastic Dipped Handle (3)
Polished Chrome (13)
Polished Chrome/Nickel Plated (2)
Red Painted (1)
: Blast (1)
High Polished Chrome (1)
Nickel Chrome Plated (1)
Plastic Dipped (1)
Polished Chrome (9)
: 6.5 to 8 in (1)
: Yes (1)
: Straight (1)
: 8-16 AWG Solid, 10-18 AWG Stranded (1)
: 1/2 in EMT (1)
3/4 in, 1/2 IMC & 1/2 RIGID (1)
: 1 - 50 Khz (1)
1 - 500 Khz (3)
1 Hz to 500 kHz (1)
45 - 400 Hz (1)
50-500 Hz (4)
: Perforated Neoprene Comfort (1)
: Ball Peen (1)
: Black (2)
Black/Yellow (3)
Yellow/Black (2)
: 3.438 in (1)
4-3/4 in (1)
5-3/4 in (1)
5-3/8 in (1)
5.328 in (1)
5.563 in (1)
5.688 in (1)
6 in (2)
6-1/8 in (2)
6-3/4 in (3)
: Acetate (1)
Anodized Aluminum (1)
Black Powder Coat On Alloy (1)
Fiberglass (1)
Hickory Wood (2)
High Dielectric Plastic (4)
Plastic (36)
Plastic Dipped (2)
Plastic/Rubber (1)
Rubber (6)
: 4-1/4 in (1)
: Ball End Tee (2)
Comfort Grip (4)
Comfort Grip with Curved (1)
Comfortable (1)
Comfortable Grip (1)
Curved (3)
Cushion Grip (50)
Cushioned (3)
Dipped (1)
Double Dipped (1)
: 15 deg (1)
: Carbon Steel (1)
HC Substrate (1)
: 16 oz (2)
32 oz (1)
: 0.05 to 5/16 in (1)
1.5-10 mm (1)
1/2 to 3/32 in (1)
2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm and 10 mm (1)
3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in (1)
3/32 to 3/8 in (1)
5/64 to 1/4 in (1)
9 in (1)
: ABS (2)
Aluminum (1)
Silicone (1)
: Yes (2)
: 1-1/8 x 15/16 in, 1 x 13/16 in, 7/8 x 11/16 in, 3/4 x 9/16 in, 5/8 x 7/16 in, 1/2 x 3/8 in (1)
: Insulated (2)
No (46)
Non-Insulated (5)
Yes (10)
: No (1)
: Yes (1)
: 0 deg (1)
: 0.58 in (1)
1.5 in (1)
: 1.56 in (1)
1.6 in (1)
1.709 in (2)
1.895 in (1)
1.969 in (1)
2-5/16 in (1)
2.32 in (2)
: Alloy Steel (3)
Forged Steel (1)
Hardened Steel (1)
Induction Hardened Steel (2)
Steel (21)
Tool Steel (1)
: 1 in (1)
1-3/4 in (1)
1.28 in (1)
2.36 in (1)
: 0.438 in W x 0.518 in L x 0.24 in Thk (1)
0.45 in L x 0.26 in W x 0.09 in THK (1)
0.81 in L x 1.19 in W x 0.81 in Thk (1)
0.813 in L x 1.188 in W x 0.46 in Thk (1)
0.813 in L x 1.25 in W x 0.46 in THK (3)
0.83 in L x 1.25 in W x 0.49 in THK (1)
1 in L x 0.969 in W x 0.5 in Thk (1)
1-3/8 in (1)
1-9/32 in L x 1-5/32 in W x 1-9/32 in Thk (1)
1.06 in (1)
: Serrated (1)
: Beveled (1)
Cross Hatched Knurled (1)
Cross-Hatched Knurled (3)
Curved Needle (1)
Knurled (2)
Serrated nose (1)
Short (4)
Smooth (1)
Standard (2)
Streamlined Design with Sure-gripping, Cross-Hatched Knurled (2)
: 0.51 in (1)
0.688 in (3)
1 in (1)
1.02 in (2)
1.26 in (1)
1/2 in (1)
: LED (1)
: 1.4 m (1)
12.15 mm (1)
15 in (1)
2.203 in (1)
29-1/2 in (1)
4.1 in (1)
55 in (1)
7-1/2 in (1)
7.3 in (1)
8 in (1)
: 1-7/8 in (1)
: Green light (1)
: 100 lb (1)
10000 lb (1)
12000 lb (1)
150 lb (1)
5000 lb (1)
8000 lb (1)
: 150 Lumens Spotlight/50 Lumens Floodlight (1)
175 Lumens Low/460 Lumens High (1)
70 Lumens (1)
All-On/Boost: 400; Spot/High: 200; Flood/Low: 100 Lumens (1)
: Magnetizing/demagnetizing (1)
Permanent Rare Earth (1)
: No (37)
Yes (4)
: #10 Canvas (1)
#4 Canvas (1)
#8 Canvas (1)
1095 Steel (1)
1680D Ballistic Weave, Mesh interior (1)
1680d Ballistic Weave (3)
1680d Ballistic Weave Body, Hard Molded Polypropylene Bottom (2)
4140 Steel (1)
8640 Steel (1)
98% Polyester, 2% Spandex (1)
: Aluminum, Soft Copper (2)
Penetration Cuts And Hole Making (1)
: 1000 VAC (3)
: 12 to 1000 VAC (1)
: Imperial (53)
Imperial, Metric, TORX (1)
Metric (5)
SAE (16)
: 0-90/180 (1)
1000 VAC/DC, 10 A AC/DC, 40 Mohm (1)
1000 VAC/VDC, 10 A, 40 mOhm (1)
600 VAC/DC, 10 A AC/DC, 40 Mohm (1)
65 (1)
: Imperial (1)
: 7/8 in (1)
: Base (1)
Bracket (1)
Magnet (1)
: 0.2 in (1)
0.281 in (1)
0.438 in (1)
1 in (2)
1-1/2 in (1)
1-3/16 in (1)
1-3/8 in (7)
1.019 in (1)
1.02 in (1)
1.15 in (1)
: No (1)
: .25 in (1)
: 3 (1)
: 1 (2)
20 Pockets (1)
39 Pockets (1)
45 Pockets (1)
48 Pockets (1)
: 2 (1)
: 2 (1)
: 1 (1)
10 (2)
11 (1)
12 (1)
14 (1)
2 (7)
20 (1)
26 (1)
28 (1)
3 (2)
: 1 (1)
3 (1)
: 12 (1)
4 (1)
6 (3)
: 2 (1)
: 3 (2)
4 (1)
: 7.969 in (1)
8 in (1)
: Bearing-Assist Opening (1)
Dual Thumb Stud (1)
: -40 to 1832 deg F (1)
32 to 104 deg F (1)
: 5 in (1)
: 13.5 in W x 11 in L x 19.5 in H (1)
19 in Dia x 19 in W x 23 in L x 23 in H (1)
6 in W x 18 in L x 14 in H (1)
7.25 in W x 20 in L x 14.5 in H (1)
8.75 in W x 8.75 in L x 17 in H (1)
: 18 in (1)
5 in (1)
: 8 in (1)
9 in (1)
: 1 in (1)
1-1/4 in (2)
10 in (2)
10-1/8 in (1)
10-3/4 in (1)
10.6 in (1)
10.938 in (1)
11 in (1)
11-1/4 in (2)
11-5/16 in (1)
: 10 in (1)
2 in (2)
7 in (1)
: 1-1/16 in (2)
1-1/4 in (1)
1.063 in (1)
: 1.5 in (1)
: Yes (2)
: #0, 3/32 in (1)
#00, 1/8 in (1)
#1 (1)
#1, #2, 1/4 in, 3/16 in, 5/16 in (1)
#1, 3/16 in (1)
#10, #15 (1)
#2 (2)
#2, 1/4 in (1)
#2, 3/16 in (1)
#3 (1)
: Cabinet (6)
Keystone (3)
Keystone Slotted (1)
Nut Driver (1)
Phillips, Slotted (3)
Phillips® (4)
Phillips®, Slotted (2)
Phillips®, Slotted, Nut Setter (1)
Screw Holding (1)
Slotted (2)
: 356 mm (1)
: 3 x AA Batteries (1)
3 x Aaa (1)
6 x AA Batteries (1)
Lithium-Ion Batteries (1)
: 2 - 600 VAC/VDC (1)
Low: 50V AC - 1.5kV AC High: 1.5kV AC - 132kV AC (1)
: Yes (1)
: Yes (1)
: 20 mOhm (1)
40 mOhm (3)
60 MOhm (3)
: 4000 mOhm (1)
: 10800 Pixels (1)
: CAT III 600V (1)
CAT IV 600V (1)
CAT IV 600V / CAT III 1000V (1)
CAT IV 600V and CAT III 1000V (1)
CAT IV 600V, CAT III 1000V, Class 2 (1)
Cat Iii 600V, Class 2, Double insulation (1)
Cativ 600V/Catiii 1000V; Electrical: Catiii 600V/Catii 1000V; Class 2 (1)
: #00 to #0, 3/32 to 1/4 in, T7 to T15 (1)
#2 (2)
1/4 in (1)
1/8 in (2)
3/16 to 1/4 in (1)
5/32 to 1/4 in (1)
6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 in (1)
: #1 and #2 combination tip (1)
1/16 in (2 mm) Slotted/2 in (51 mm) Blade (614-2), #0 Phillips®/3 in (76 mm) Blade (613-3), 3/32 in (2 mm) Slotted/3 in (76 mm) Blade (614-3) and 1/8 in (3 mm) Slotted/4 in (102 mm) Blade (614-4) (1)
1/4 in (6 cm) Keystone Tip, #2 Phillips® (1)
1/4 in (6.4 mm), 5/16 in (7.9 mm) Keystone, 5/16 in (7.9 mm) and 3/16 in (4.8 mm) Cabinet Tip, #1 Phillips®, #2 Phillips® Stubby, #2 Phillips®, #3 Phillips® (1)
1/8 in (3.2 mm) 6 in shank, 1/8 in (3.2 mm) 4 in shank, 1/16 in (1.6 mm) and #0 Phillips® (1)
5/16 in Cabinet-Tip and one #2 Phillips®-Tip (1)
7 Cushion Grip Screwdrivers, 1/4 in, (6.4 mm) Square, 3/16 in, 5/16 in (4.8 mm to 7.9 mm) 3 in (76.2 mm) Shank Cabinet Tip, 3/16 in (4.8 mm) Cabinet Tip 6 in (152.4 mm) Shank, 1/4 in (6.4) Cabinet Tip, #1 Phillips®, #2 Phillips® (1)
7 Screwdrivers, #1 Phillips®, #2 Phillips®, 1/4 in, 5/16 in, 1/8 in (6.4 mm to 3.2 mm) Cabinet Tip 3 in (76.2 mm) Shank, 1/8 in (3.2 mm) Cabinet Tip 4 in (101.6 mm) Shank, 1/8 in (3.2 mm) Cabinet Tip 6 in (152.4 mm) Shank and Case (1)
Cabinet/Keystone/Phillips®/Slotted (1)
Slotted and Phillips® (1)
: 2000 (2)
4500 (1)
4600 (1)
4800 (1)
D504 Series (2)
Et Series (1)
Long Series (1)
Tradesman Pro™ Series (2)
: 1.266 in (1)
2-1/2 in (1)
2.09 in Long, 0.34 in Short (1)
3 in (6)
4 in (9)
4.109 in (2)
6 in (6)
7 in (4)
8 in (3)
: Alloy Steel (4)
Steel (12)
Vanadium Steel (1)
: 0.383 in (1)
1/4 in (2)
3/8 in (3)
4 in (1)
7 in (1)
: Hex (4)
Round (18)
Round with Hex Bolster (1)
Square (2)
: 32-6 AWG, 32-8 AWG (3)
40-4 AWG, 40-5 AWG, 32-6 AWG, 32-8 AWG, 32-10 AWG, 24-10 AWG (1)
: Charge Every 3 Months (2)
: 0.75 in W x 13.25 in L x 4 in H (1)
1/4 in, 5/16 in (1)
1/4 in, 5/16 in, 11/32 in, 3/8 in, 1/2 in, 7/16 in, 9/16 in (1)
3/16 in, 1/4 in, 5/16 in, 11/32 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in (1)
3/8 in (1)
3/8 in, 5/16 in, 1/4 in (2)
5/16 in (2)
Medium (1)
One Size Fits All (1)
Up to 3 in W Belt (1)
: 1/4 to 3/4 in (1)
1/4 to 9/16 in (1)
1/4 x 5/16 to 13/16 x 7/8 in (1)
3/16 to 1/2 in (2)
3/8 to 1-1/4 in (1)
: 0.25 in (1)
0.313 in (1)
0.375 in (1)
0.56 in (1)
: 1/4 in, 5/16 in, 11/32 in, 3/8 in, 7/16 in, 1/2 in (1)
3/4 in, 13/16 in, 1 in, 1-1/8 in (1)
: Flip (1)
Single-End Impact (1)
: 1-Pocket, Slotted Belt (1)
12-Point, 15 deg Offset, Box/Open End Drive (2)
12-Point, Offset, Box End Drive (1)
3-1/2 in Shank (1)
3-Pocket, 1 in Reinforced Gusset, Tunnel Belt Connection (1)
3.703 in Handle (1)
3/8 in Drive, 6 or 12-Point (1)
6 in Blade (1)
6 in L Arm (1)
6 in L Blade (1)
: ANSI/ASME Specified (6)
ASME B107 (1)
ASME B107.2 (1)
CAT IV 1000V: NCVT-3P (1)
IEC 60900 and ASTM F1505 (2)
IEC 60900: 2012, ASTM F1505-10 (1)
SAE (1)
: Yes (2)
: 7'' to 9'' Side-cutting Pliers (1)
All Hammers Except Lineman's (1)
Apple® iPhone, Apple® MacBook and Apple® Watch (1)
Cuts Cable, Telephone Wire and Strips insulation (1)
Tools and Hammers (1)
Turning Bolts (1)
Turning Fasteners (1)
: Imperial (4)
: 8 TPI (1)
: 100 ft (1)
50 ft (1)
: Fiberglass (1)
Steel (1)
: Triple Ground (1)
: -4 to 752 deg F (1)
-40 to 1832 deg F (1)
0 to 1000 deg F (2)
0 to 1500 deg F (1)
: Yes (1)
: 0.7 in (1)
: 3 mm (1)
3/16 in (2)
: 1/8 in (1)
: 10-in-1, 11-in-1 and 10-Fold™ Screwdrivers (1)
: 200028EINS Diagonal Cutters, 11054EINS Wire Stripper, 2139NEEINS Side-Cutting Pliers, 6934INS and 6924INS Screwdrivers (1)
4 Types of Pliers, 6 Screwdrivers, 7 Nut Drivers, Hex Key Set, Torpedo Level, Crimper/Cutting Tool, Wire Stripper/Cutter Kit, NCVT with Flashlight, GFCI Tester, Utility Knife, Tape Measure, Canvas Zipper Bag, Tool Bag Backpack and Protective Eyewear (1)
: Bag Back Pack (1)
Tool Belt (1)
: T10, T15, T20, T25, T27, T30, T40 (1)
: 1-Blade (1)
10-in-1 Multi-Bit Heavy Duty (1)
11-in-1 (1)
14-in-1 Precision (1)
3-in-1 (1)
4-in-1 Electronic Pocket (1)
4-in-1 Rotating (1)
6-In-1 Tapping (1)
8-Piece (1)
AC Auto-Ranging (1)
: Plastic (1)
: 0 deg Horizontal And Cross, 90 deg Vertical (1)
Glow-N-The-Dark (1)
High Visibility (1)
Large, Easy-to-Read High-Visibility (1)
: High (1)
: 1000 VAC/DC (3)
5 V (1)
600 VAC/DC (1)
: 32 to 48 in (1)
36 to 44 in (1)
: <5 mW (1)
: 630 - 680 nm (1)
: 2 in (1)
: No (1)
: 10 M (1)
: 0.94 in (1)
1.3125 in (1)
1/4 to 5/16 in (1)
1/5 in (1)